www. m oxa. com Compact/Fanless Computers > IA260 Series Compact/Fanless Computers 26-24 26 Hardware Specifications Computer CPU: Cirrus EP9315 ARM9 CPU, 200 MHz USB: USB 2.0 hosts x 2, type A connector DRAM: DDR2 SDRAM, 128 MB Flash: NOR Flash, 32 MB OS (pre-installed): Linux or Windows CE 6.0 Storage Storage Expansion: CF card type I/II Display Graphics Controller: EP9315 internal graphics accelerator engine with TTL graphical signal support Display Memory: Dynamic video memory (shares system memory) Display Interface: CRT interface for VGA output, DB15 female connector Resolution: 1024 x 768, 8 bits Ethernet Interface LAN: Auto-sensing 10/100 Mbps ports (RJ45) x 2 Magnetic Isolation Protection: 1.5 kV built-in Serial Interface Serial Standards: RS-232/422/485 ports, software-selectable (DB9 male) x 4 ESD Protection: 4 kV for all signals Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1) Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 Baudrate: 50 bps to 921.6 kbps (supports nonstandard baudrates; see user’s manual for details) Serial Signals RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND RS-485-2w: Data+, Data-, GND Digital Input Input Channels: DI x 8 Input Voltage: 0 to 30 VDC Digital Input Levels for Dry Contacts: • Logic level 0: Close to GND • Logic level 1: Open Digital Input Levels for Wet Contacts: • Logic level 0: +3 V max. • Logic level 1: +10 V to +30 V (COM to DI) Connector Type: 10-pin screw-fastened terminal block (8 points, COM, GND) Isolation: 3 kV optical isolation Digital Output Output Channels: DO x 8, sink type Output Current: Max. 200 mA per channel On-State Voltage: 24 VDC nominal, open collector to 30 V Connector Type: 9-pin screw-fastened terminal block Isolation: 3 kV optical isolation LEDs System: Power, Ready, Storage LAN: 10M/Link x 2, 100M/Link x 2 (on connector) Serial: TxD x 4, RxD x 4 Switches and Buttons Reset Button: Supports “Reset to Factory Default” Physical Characteristics Housing: Aluminum, industrial vertical form factor Weight: 1 kg (2.22 lb) Dimensions: 52 x 112.6 x 162 mm (2.05 x 4.43 x 6.38 in) Mounting: DIN-rail, wall Environmental Limits Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: Standard Models: -20 to 80°C (-4 to 176°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Anti-Vibration: 2 Grms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis Anti-Shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms Power Requirements Input Voltage: 12 to 48 VDC (3-pin terminal block) Input Current: With no load on USB ports: • 240 mA @ 24 VDC • 480 mA @ 12 VDC With full load on USB ports: • 450 mA @ 24 VDC • 900 mA @ 12 VDC Power Consumption: With no load on USB ports: 5.8 W With full load on USB ports: 11 W Standards and Certifications Safety: UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1, CCC (GB4943, GB9254, GB17625.1) EMC: EN 55022 Class A, EN 61000-3-2 Class A, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV IEC 61000-4-6 CS: Signal: 3 V/m IEC 61000-4-8 1 A/m IEC 61000-4-11 Green Product: RoHS, CRoHS, WEEE Reliability Automatic Reboot Trigger: Built-in WDT (watchdog timer) MTBF (mean time between failures) Time: 145,328 hrs Standard: Telcordia (Bellcore) Standard Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Note: The Hardware Specifications apply to the embedded computer unit itself, but not to accessories. In particular, the wide temperature specification does not apply to accessories such as the power adapter and cables.