12-64 www. m oxa. com in fo @ mo xa .c o m Multiport Serial Boards > CB-602I Series Multiport Serial Boards 12 CB-602I Series 2-port CAN interface PC/104-Plus modules with 2 kV isolation Moxa’s new CB-602I CAN (Controller Area Network) interface board supports the PC/104-Plus interface. Optional DB9 and DB25 connection cables are available for connecting to CAN interface device. The CB-602I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CB-602I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments. › ›CAN 2.0A and CAN 2.0B supported › ›Two independent CAN communication ports › ›CAN transfer rate up to 1 Mbps › ›2 kV electrical isolation › ›LED for transmit/receive status on each port › ›Optional 120 ohm terminal resistor for CAN bus network › ›DLL library and examples included › ›Windows drivers provided Hardware Connector: 20-pin box header CAN Controller: NXP SJA1000 CAN Transceiver: PCA82C251 CAN Specification: CAN 2.0 A/B Signal Support: CAN_H, CAN_L, GND Transfer Rate: 1 Mbps Max. Number of Boards per PC: 4 Electrical Isolation: 2 kV Termination Resistor: 120 ohms (selected by jumper) Driver Support Windows: Windows 2000, Windows XP/2003/Vista/2008 (x86/x64) Note: Please refer to Moxa’s website for the latest driver support information. Software Libraries: Visual C/C++, Borland C/C++ Environmental Limits Operating Temperature: Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class B EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 MTBF (mean time between failures) Time: 248,563 hrs Standard: Telcordia (Bellcore) TR/SR Power Requirements Input Current: 380 mA @ 5 VDC Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Specifications Overview