12-63 in fo @ mo xa .c o m www.mo xa .c o m Device Connectivity Multiport Serial Boards > CP-602U-I Series 12 CP-602U-I Series 2-port CAN Interface Universal PCI boards with 2 kV isolation Moxa’s new CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the CP-602U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP- 602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602U-I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments. › ›CAN 2.0A and CAN 2.0B supported › ›Two independent CAN communication ports › ›CAN transfer rate up to 1 Mbps › ›2 kV electrical isolation › ›LED for transmit/receive status on each port › ›Optional 120 ohm terminal resistor for CAN bus network › ›DLL library and examples included › ›Windows driver provided Hardware Connectors: DB9 male x 2 CAN Controller: NXP SJA1000 CAN Transceiver: PCA82C251 CAN Specification: CAN 2.0 A/B Signal Support: CAN_H, CAN_L, GND Transfer Rate: 1 Mbps Max. Number of Boards per PC: 4 Electrical Isolation: 2 kV Termination Resistor: 120 ohm (selected by jumper) Card Interface: Universal PCI Driver Support Windows: Windows 2000, Windows XP/2003/Vista/2008 (x86/x64) Software Libraries: Visual C/C++, Borland C/C++ Environmental Limits Operating Temperature: Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class B EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 MTBF (mean time between failures) Time: 1,989,990 hrs Standard: Telcordia (Bellcore) SR-332 Power Requirements Input Current: 365 mA @ 5 VDC Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Specifications Overview PIN Signal 2 CAN L 3 CAN GND 5 Shield 7 CAN H DB9 male Available Models CP-602U-I: 2-port CAN interface Universal PCI board, with 2 kV electrical isolation, 0 to 55°C operating temperature CP-602U-I-T: 2-port CAN interface Universal PCI board with 2 kV electrical isolation, -40 to 85°C operating temperature Connection Options (can be purchased separately) CBL-F9M9-150: DB9-F to DB9-M serial cable, 150 cm CBL-F9M9-20: DB9-F to DB9-M serial cable, 20 cm 1 5 6 9 Pin Assignment Ordering Information Dimensions Unit: mm (inch) 106.3 (4.19) 58 (2.28) 80 (3.15) 120 (4.72) 120.5 (4.74) 101.07 (3.98) 72 (2.8) Package Checklist • 1 Universal PCI board with standard bracket • Documentation and software CD • Quick installation guide (printed) • Warranty card