19-34 www. m oxa. com IP Surveillance IP Surveillance > VP-IR2 19 Infrared Wavelength 850 nm Angle VP-IR22080: 20° VP-IR26080: 60° IR Effective Range VP-IR22080: 60 to 100 m VP-IR26080: 20 to 50 m Active IR On/Off Controlled by built-in photocell light sensor Passive IR On/Off Volt-free relay input Operating Temperature -30 to 60°C (-22 to 140°F) Weatherproofing IP66 ICR Switching 12 VDC power output Power Consumption 10 W Power Requirement 12 VDC Specifications VP-IR2 High power IR illuminator for industrial surveillance Introduction The VP-IR2 series IR illuminator is designed specifically to work with Moxa VPort series IP cameras and PT scanners. The VP-IR2 features high power efficiency and a lower LED life cycle, and is suitable for all types of industrial surveillance applications. The VP-IR2 can be easily mounted on a VPort camera housing or IR bracket available for Moxa PT scanners. Ordering Information Dimensions Unit: mm Side View Rear View Front View 73±0.2 97±0.3 90±0.2 42±0.2 115±0.2 134±0.3 › ›DSI technology › ›More than 50% energy savings › ›Flexible beam pattern › ›Wide application range › ›Active/Passive mode for ICR synchronization Note: The VPort camera should use DC power to accept volt-free relay output from the VP-IR2 series. Available Models VP-IR22080: Infrared LED illuminator, 20°, 850 nm, 12 VDC, illuminates up to 60 to 100 m VP-IR26080: Infrared LED illuminator, 60°, 850 nm, 12 VDC, illuminates up to 20 to 50 m Package Checklist • IR illuminator • Mounting screws • Relay wire • Quick installation guide