1-50 www. m oxa. com EDS-G205-1GTXSFP/G308 Series 1 Industrial Ethernet Switches Industrial Ethernet Switches > EDS-G205-1GTXSFP/G308 Series 5G and 8G-port full Gigabit unmanaged Ethernet switches Introduction The EDS-G205-1GTXSFP and EDS-G308 switches are equipped with 5 and 8 Gigabit Ethernet ports, respectively, and up to 2 fiber optic ports (one for EDS-G205-1GTXSFP series and two for EDS-G308-2 SFP series), making them ideal for applications that demand high bandwidth. The EDS-G205-1GTXSFP/G308 switches provide an economical solution for your industrial Gigabit Ethernet connections, and the built-in relay warning function alerts network managers when power failures or port breaks occur. In addition, the add-on 4-pin DIP switches can be used for controlling over the functions of broadcast Specifications protection, jumbo frame, IEEE 802.3az energy saving and 100/1000 SFP speed switching (EDS-G205-1GTXSFP series only) is ideal for easy on-site configuration for any industrial automation application. Two models are available in this series. One model has an operating temperature range of -10 to 60°C, and the other model has an extended operating temperature range of -40 to 75°C. Both models undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control applications. The EDS-G205- 1GTXSFP/G308 switches can be installed easily on a DIN-rail or in distribution boxes. › ›Fiber optic options for extending distance and electrical noise immunity › ›Redundant dual 12/24/48 VDC power inputs › ›Supports jumbo frame transmission up to 10 KB (EDS-G205- 1GTXSFP series) and 9.6 KB (EDS-G308 series) › ›Relay output warning for power failure and port break alarm › ›Broadcast storm protection › ›-40 to 75°C operating temperature range (T models) Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control IEEE 802.3az for Energy-Efficient Ethernet Processing Type: Store and Forward Switch Properties MAC Table Size: 8 K Packet Buffer Size: 1024 kbit (EDS-G205-1GTXSFP Series), 4 Mbit (EDS-G308 Series) Jumbo Frame Size: 10 KB (EDS-G205-1GTXSFP Series), 9.6 KB (EDS-G308 Series) Interface RJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Ports: 100/1000BaseSFP slot (SFP model) DIP Switches: One for port break alarm, one for Enable/Disable broadcast storm protection, jumbo frame, IEEE 802.3az energy saving and 100/1000 SFP speed switching (EDS-G205-1GTXSFP series only) Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC Power Requirements Input Voltage: 12/24/48 VDC, redundant dual inputs Operating Voltage: 9.6 to 60 VDC Input Current: EDS-G205-1GTXSFP: 0.14 A @ 24 V EDS-G308: 0.29 A @ 24 V EDS-G308-2SFP: 0.31 A @ 24 V Connection: 1 removable 6-contact terminal block Reverse Polarity Protection: Present Physical Characteristics Housing: Metal IP Rating: IP30 protection Dimensions: EDS-G205-1GTXSFP Series: 29 x 135 x 105 mm (1.14 x 5.31 x 4.13 in) EDS-G308 Series: 53 x 135 x 105 mm (2.08 x 5.31 x 4.13 in) Weight: EDS-G205-1GTXSFP Series: 290 g (0.64 lb) EDS-G308 Series: 880 g (1.94 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 508, EN 60950-1 (LVD) Hazardous Location: UL/cUL Class 1 Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nA nC IIC T4 Gc (EDS-G205-1GTXSFP series) EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 Rail Traffic: EN 50121-4 (EDS-G205-1GTXSFP series) Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Note: Please check Moxa’s website for the most up-to-date certification status.