3-27 www.mo xa .c o m Industrial Ethernet 3 Ethernet Media Converters and Extenders > IEX-408E-2VDSL2 Series Specifications Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP ITU G.993.2 for very high speed digital subscriber line transceivers 2 Management: SNMP v1/v2c/v3, LLDP, Syslog, RMON, DHCP Server/ Client, DHCP Option 66/67/82, BootP. TFTP, SMTP, RARP, Telnet, SNMP Inform, Flow Control, Back Pressure Flow Control Filter: 802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2/v3, GMRP Redundancy Protocols: STP, RSTP, MSTP, Turbo Ringv1/v2, Turbo Chain, Link Aggregation Security: RADIUS, TACACS+, SSL, SSH Time Management: SNTP, NTP Server/Client Industrial Protocols: EtherNet/IP, PROFINET IO, Modbus/TCP MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 Interface DSL Port: RJ11 (RJ45 connector) or detachable 2-contact terminal block RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Console Port: USB-serial console (Type B connector) LED Indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (Fast Ethernet port), MSTR/HEAD, CPLR/TAIL, DSL BYPASS Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC Storage Port: USB storage port (Type A connector) Button: Reset button Digital Inputs: 1 input with the same ground, but electrically isolated from the electronics. • +13 to +30 V for state “1” • -30 to +3 V for state “0” • Max. input current: 8 mA Switch Properties MAC Table Size: 16K Packet Buffer Size: 1.5 MB for Fast Ethernet side; 8 KB for DSL side Priority Queues: 4 Max. Number of Available VLANs: 64 VLAN ID Range: VID 1 to 4094 IGMP Groups: 256 Physical Characteristics Housing: Metal, IP30 protection Dimensions: 70 x 111 x 135 mm (2.76 x 4.37 x 5.39 in) Installation: DIN-rail mounting, wall mounting (with optional kit) Altitude: Up to 2000 m Note: Contact Moxa for products guaranteed to function at higher altitudes. Environmental Limits Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Power Requirements Input Voltage: LV Models: 12/24/48 VDC, redundant dual inputs HV Models: 110/220 VDC/VAC Operating Voltage: LV Models: 9.6 to 60 VDC HV Models: 88 to 300 VDC, 85 to 264 VAC Connection: 5-pin terminal block Overload Current Protection: Present Reverse Polarity Protection: Present Standards and Certifications Safety: UL 61010-2-201, EN 60950-1 (LVD) (In plan) EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class A EMS: EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 10 V/m EN 61000-4-4 (EFT): Power: 4 kV EN 61000-4-5 (Surge): Power: 4 kV; Signal: 4 kV EN 61000-4-6 (CS): 10 V EN 61000-4-8 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Traffic Control: NEMA TS2 (In plan) Rail Traffic: EN 50121-4 (In plan) Vibration: IEC 60068-2-6 Note: Please check Moxa’s website for the most up-to-date certification status. MTBF (mean time between failures) Standard: Telcordia (Bellcore), GB Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty