8 Railway Wireless LAN Solutions > Industrial Wireless www.mo xa .c o m WAC-1001 Series 8-9 WAC-1001 Series Introduction Specifications Industrial wireless access controller The goal of zero-latency-roaming is to create networks that maintain seamless communications as clients switch from one access point to another. As part of its AWK-RTG series, Moxa has introduced the WAC-1001 wireless access controller that uses controller-based Turbo Roaming to achieve less than 50 ms roaming on three channels. This advanced roaming capability securely hands off clients at speeds so high that wireless clients can enjoy seamless roaming between APs, with virtually no interruption in connectivity. Maximum Availability • Enables millisecond level Turbo Roaming • Configuration back-up • Dual redundant DC power inputs Advanced Security • IEEE802.1X/RADIUS supported • WPA/WPA2/802.11i supported • Integrated DI/DO for on-site monitoring and warnings › ›Redundant 12 to 48 VDC power inputs › ›Controller-based Turbo Roaming (less than 50 ms) › ›Supported models: AWK-RTG series › ›IEEE 802.11i-compliant wireless security › ›DIN-rail or wall mounting (optional) for onsite installation › ›-40 to 75°C operating temperature range (T model) WLAN Interface Standards: IEEE 802.11i for Wireless Security IEEE 802.3u for 10/100/1000BaseT(X) IEEE 802.3af for Power-over-Ethernet Security: WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES) LAN Interface Standards: IEEE 802.1x (Radius client) IEEE 802.3u for 10/100/1000BaseT(X) IEEE 802.3af for Power-over-Ethernet Interface LAN Port: 10/100/1000BaseT(X), auto negotiation speed (RJ45-type) Console Port: RS-232 (RJ45-type) LED Indicators: PWR1, PWR2, PoE, FAULT, STATE, LAN Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC Digital Inputs: 2 electrically isolated inputs • +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA Physical Characteristics Housing: Metal, IP30 protection Weight: 1060 g (2.34 lb) Dimensions: 52.85 x 135 x 105 mm (2.08 x 5.32 x 4.13 in) Installation: DIN-rail mounting, wall mounting (optional) Environmental Limits Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Power Requirements Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant) Input Current: 0.6 A @ 12 VDC; 0.15 A @ 48 VDC Connector: 10-pin removable terminal block Reverse Polarity Protection: Present Standards and Certifications Safety: EN 60950-1(LVD), UL 60950-1, IEC 60950-1(CB) EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B, Class A EMS: IEC 61000-4-2 ESD: Contact 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV EN 61000-4-6 CS: 10 V EN 61000-4-8 Note: Please check Moxa’s website for the most up-to-date certification status.