Note: All specifications are subject to change without notice. 11 Rackmount Network Appliance Selection Guide Model FWS-7821 FWS-7820 FWS-7811 Platform Form Factor 1U Rackmount Network Platform 1U Rackmount Network Platform 1U Rackmount Network Platform Processor Intel® 6th/7th Generation Core™/ Xeon Processors Intel® 6th Generation Core™/ Xeon Processors Intel® LGA1150 4th Gen Core™/ Xeon Processor Chipset Intel® C236 Intel® C236 Intel® C226 System Memory DDR4 1600/1866/2133 UDIMM/ECC, Up to 64GB, 288-pin DIMM x 4 DDR4 1600/1866/2133 UDIMM/ECC, Up to 64GB, 288-pin DIMM x 4 DDR3 1333/1600 UDIMM/ECC, up to 32GB, 240-pin DIMM x 4 Network Ethernet Intel® i211 Gigabit Ethernet x 8 + NIM x 1 Intel® i210-AT 1GbE x 6 + NIM Intel® i211, GbE x 8 + NIM Bypass On board 2 pairs bypass, others depend on NIM module On board 2 pairs bypass, others depend on NIM module 2 ~ 4 (Depends on NIM) NIM Slot 1 4 (Max. 5 slots by project base) 1 Display Graphic Controller Intel® Integrated Intel® Integrated Intel® Integrated Connector VGA cable (Optional) VGA cable (Optional) VGA cable (Optional) Storage HDDs Internal 3.5” SATA HDD x 1 Internal 3.5” SATA HDD x 1 or 2.5” SATA HDD x 2 (Optional)* (mSATA/ CF/ CFast will be disabled if 2nd SATA HDD is used) Internal 2.5” SATA HDD x 2 or 3.5” SATA HDD x 1 (Optional) CF/CFast/mSATA CF socket x 1 (Optional BOM CFast™ socket or mSATA slot) CF socket x 1 (Optional BOM CFast™ socket or mSATA slot) CF socket x 1 Expansion/Internal Interface PCIe Slot Up to PCIe x 2 [x8] slots PCIe [x4] signal use [x8] slot (3rd NIM slot will be disabled if PCIe Riser Supported) PCIe [x8] slot x 1 (Optional) Mini-Card — — — IPMI — — — KB Mouse — — Pin-header USB Pin-header Pin-header USB 3.0 x 2, Box Header (2.0mm) USB 2.0 x 2 Box Header (2.0mm) (optional) Miscellaneous RTC Internal RTC Internal RTC Internal RTC Watchdog Timer 1~255 steps by software programmable, 1 sec per step 1~255 steps by software programmable, 1 sec per step 1~255 steps by software programmable Software Button GPIO Programmable push button x 1 GPIO Programmable push button x 1 GPIO Programmable push button x 1 TPM Yes Yes — GPIO 8bits, BIOS default 4 bits input, 4bits output. 8bits, BIOS default 4 bits input, 4bits output. — FAN 2 3 2 MTBF (Hours) — — 97,000 Color Black Black Black Environmental Parameters and Dimension Power Requirement 250W ATX PSU 250W ATX PSU 275W Redundant PSU Operation Temp. 32°F ~ 104°F (0°C ~ 40°C) 32°F ~ 104°F (0°C ~ 40°C) 32°F ~ 104°F (0°C ~ 40°C) Storage Temp. -4°F ~ 140°F (-20°C ~ 60°C) -4°F ~ 140°F (-20°C ~ 60°C) -4°F ~ 140°F (-20°C ~ 60°C) Operating Humidity 10 ~ 80% 10 ~ 80% 10 ~ 80% Storage Humidity 10 ~ 80% @ 40°C, non-condensing 10 ~ 80% @ 40°C, non-condensing 10 ~ 80% @ 40°C, non-condensing Vibration 0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D) 1.5 Grms/ 5 ~ 500Hz/ no operation 0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D) 1.5 Grms/ 5 ~ 500Hz/ no operation 0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D) 1.5 Grms/ 5 ~ 500Hz/ no operation Shock 10G peak acceleration (11 m sec. duration), operation 20G peak acceleration (11 m sec. duration), non-operation 10 G peak acceleration (11 m sec. duration), operation 20 G peak acceleration (11 m sec. duration), non-operation 10 G peak acceleration (11 m sec. duration), operation 20 G peak acceleration (11 m sec. duration), non-operation Chassis Dimension (W x D x H) 16.93” x 12.01” x 1.73” (430mm x 305mm x 44mm) 16.93” x 18.7” x 1.73” (430mm x 475mm x 44mm) 16.93” x 18.7” x 1.73” (430mm x 475mm x 44mm) I/O Interfaces Front Panel Power LED x 1 Status LED x 1 HDD Active LED x 1 USB 3.0 Ports x 2 RJ-45 Console x 1 Parallel LCM display and 4 keypad x 1 (Optional w/ NIM slot) Software Programmable Switch x 1" Power LED x 1 Status LED x 1 HDD Active LED x 1 USB 3.0 Ports x 2 RJ-45 Console x 1 Parallel LCM display and 4 keypad x 1 (Optional w/ NIM slot) Software Programmable Switch x 1 Power LED x 1 Status LED x 1 HDD Active LED x 1 LAN ports Link/Active LED x 8 Bypass LED (Default 2 LEDs) USB 3.0 Ports x 2 RJ-45 Console x 1 Parallel LCM display and 4 keypad x 1 Software Programmable Switch x 1 Rear Panel AC Power Input x 1 Power Switch x 1 VGA port (Optional) Rear Expansion Slot x 2 (2 x PCIe [x8] slots, NIM slot will be disabled if PCIe Riser supported) AC Power Input x 1 Power Switch x 1 VGA port (Optional) Rear Expansion Slot x 1 (Optional PCIe [x4] signal use [x8] slot, 3rd NIM slot will be disabled if PCIe Riser supported) AC Power Input x 2 Power Switch x 1 VGA port (Optional) Rear Expansion Slot x 2 (Optional)