09 www.aaeon.com Note: All specifications are subject to change without notice. Features Specifications SMARC Carrier Board ECB-960T ■ Support x86 Based SMARC Module ■ Supports Gigabit Ethernet, RJ-45 x 1 ■ HDMI, 18/24-bit Single Channel LVDS ■ High Definition Audio ■ I2C Interface, SPI Interface, UART x 2 ■ PCI-Express [x1] x 3 ■ SATA 3.0 Gb/s x 2, USB2.0 x 4, USB2.0 Device Mode x 1 ■ microSD CARD Slot ■ CSI Interface for Camera (Optional) ■ Mini-ITX Form Factor (170 mm x 170mm) ■ SMARC SPEC: Version 1.1 *Features only available if the SMARC module supports it* SMARC Carrier Board for x86 Solutions System Form Factor Mini-ITX form Factor (170mmx 170mm) I/O Chipset N/A (Legacy Support) Ethernet 10/100/1000Base-TX, RJ-45 x 1 (From CPU module) Expansion Interface PCI-Express [x1] x 3 via adapter card Power Consumption (Typical) Denpends on module Power Requirement +12V DC; +8~20VDC-in on seperate connector Board Size 6.69” x 6.69” (170mm x 170mm) Gross Weight — Operation Temperature 32 °F ~ 140 °F (0 °C ~ 60 °C) Storage Temperature -4 °F ~ 158 °F (-20 °C ~ 70 °C) Operation Humidity 10% ~ 80% relative humidity, non-condensing MTBF 80,000 Display LVDS 18/24-bit Single channel LVDS I/O Storage SATA x 1, microSD card x 1 Serial Port 2-wire x 1, 4-wire x 1 USB USB port 3.0 x 1 USB port 2.0 x 5 (Port 0 for client only) I2C Client mode Audio Line-in, Line-out, Microphone Optional Accessories • TBD USB 2.0 Client USB 3.0 HDMI Audio USB 2.0 x 4 LAN x 1