14 Network Appliances Note: All specifications are subject to change without notice. www.aaeon.com Features Specifications Front View Rear View FWS-7520 ■ 1U Rackmount Network Appliance ■ Intel® FCBGA Xeon D-1548/D-1518 (Optional) SOC ■ 288-pin ECC DDR4 x 4 1600/1867/2133MHz RDIMM Up to 128GB ■ 10/100/1000Base-TX up to 24 Ethernet ports (Optional by NIM modules) ■ 10GbE SFP+ x 2 ■ IPMI (AST2500) Port x 1, VGA/BMC/KVMoIP Supported (Optional) ■ Support 2.5” SATA HDD x 2 ■ LCM with Keypad x 1 ■ RJ-45 for Console x 1, USB 3.0 x 2 ■ 250W AC type/ 220W Redundant Power Input Requirement 1U Rackmount Network Appliance, Intel® Xeon™ Processor SoC with 3 NIM Slot Platform Form Factor 1U Rackmount Network Platform Processor Intel® FCBGA Xeon D-1548/D-1518 (Optional) SOC Chipset Integrated System Memory DDR4 1600/1866/2133 RDIMM/UDIMM/ECC, up to 128GB, 288 Pin DIMM x 4 Network Ethernet Intel® i211, Gigabit Ethernet x 1 Inphi CS4227 phy 10 Gigabit Ethernet x 2 + NIM Bypass Depends on NIM NIM Slot 3 Display Graphic Controller IPMI integrated (Optional) Connector VGA cable (Optional) Storage HDDs Support 2.5” SATA HDD x 2 CF/CFast/mSATA CF socket x 1 (Optional CFast™ socket or mSATA slot) Expansion/Internal Interface PCIe slot PCIe [x4] signal use [x8] slot (optional) Mini-card slot — IPMI Optional Module Keyboard and Mouse Pin-header Universal Serial Bus USB 3.0 x 2 Box Header (2.0mm) (optional) Miscellaneous RTC Internal RTC Watchdog Timer 1~255 step by software programmable Software Button GPIO Programmable push button x 1 TPM Yes GPIO 8bits, BIOS default 4 bits input, 4bits output. FAN 3 MTBF (Hours) — Color Black Environmental Parameters and Dimension Power Requirement 250W ATX PSU or 220W Redundant PSU (Optional) Operation Temp. 32°F ~ 104°F (0°C ~ 40°C) Storage Temp. -4°F ~ 140°F (-20°C ~ 60°C) Operating Humidity 10 ~ 80% Storage Humidity 10 ~ 80% @ 40°C, non-condensing Vibration 0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D) 1.5 Grms/ 5 ~ 500Hz/ no operation Shock 10G peak acceleration (11 m sec. duration), operation 20G peak acceleration (11 m sec. duration), non operation Chassis Dimension (W x D x H) 16.93" x 18.7" x 1.73" (430mm x 475mm x 44mm) I/O Interfaces Front Panel - Power LED x 1 - Status LED x 1 - HDD Active LED x 1 - USB 3.0 Ports x 2 - RJ-45 Console x 1 - Parallel LCM display and 4 keypad x 1 - Software Programmable Switch x 1 Rear Panel - AC Power Input x 1 - Power Switch x 1 - VGA port (Optional) - Rear Expansion Slot x 1 (Optional PCIe [x4] signal use x8 slot) RJ-45 Console x 1 NIM Slot x 3 IPMI LAN x 1 LCM Panel LED SW Programmable Button USB 3.0 Port x 2 10 GbE x 2 AC Power Input