Note: All specifications are subject to change without notice. 15 Industrial Network Appliance Selection Guide Model ICS-6270 Platform Form Factor DIN Rail Industrial Network Appliance Processor Intel® Apollo Lake Processor SoC Chipset — System Memory 204-pin DDR3L 1867MHz SODIMM x 2, up to 16GB Network Ethernet Intel® i211, Gigabit Ethernet x 6 Bypass Supports up to 2 pair bypass function Display 1 x VGA port via main board or 1 x VGA/DP port via daughter board Graphic Controller Intel® HD Graphics 505 Intergrated Connector HDMI x 1 Storage HDDs Internal 2.5” SATA HDD Bay x 1 for SATA 6.0Gb/s x 1 CF/CFast/Msata CFast socket x 1 Expansion/Internal Interface PCIe slot — Mini-PCIe slot 1xMini-Card socket (full-size) with SIM socket Keyboard & Mouse Reserve pin-header Universal Serial Bus USB3.0 x 2, USB2.0 internal 2x 5 pin-header x 1 (Optional) Miscellaneous RTC Internal RTC Watchdog Timer 1~255 steps by software programmable Software Button GPIO Programmable push button x 1 TPM Optional TPM v1.2/v2.0 GPIO Reserve internal GPIO Pin header x 1 FAN Fanless MTBF (Hours) — Color Grey Environmental Parameters and Dimension Power Requirement +9~36VDC 2-pin terminal block Operation Temp. -40°F ~ 156°F (-40°C ~ 75°C) Storage Temp. -40°F ~ 185°F (-40°C ~ 85°C) Operating Humidity 10%~80% relative humidity, non-condensing Storage Humidity 10%~80% @40°C, non-condensing Vibration 0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D) 1.5 Grms/ 5 ~ 500Hz/ no operation Shock 10G peak acceleration (11 m sec. duration), operation 20G peak acceleration (11 m sec. duration), non-operation Mechnical Chassis Dimension (W x D x H) 75 x 120 x 140 mm Mounting Wallmount, DIN Rail I/O Interfaces Front Panel USB 3.0 Port x 2 RJ-45 Port with LED x 4 (Optional up to 6 x RJ-45 Ports with LEDs via daughter board) RS-232/422/485 COM Port x 1 Isolated RS-232/422/485 COM Port x 1 (Optional via daughter board) Software Programmable button x 1 Display Port x 1 (Co-lay VGA port) Power LED x 1, HDD LED x 1, Bypass LED x 1 (Optional), Status LED x 1 (Optional) Top Panel 2-pin terminal block x 1