14 Network Appliances Note: All specifications are subject to change without notice. www.aaeon.com Features Specifications Front View Rear View FWS-7250 4 Gigabit Ethernet Ports 1U Rackmount Network Appliance with Intel® Atom™ E3845/ Celeron® J1900 Processor SoC ■ 4 LAN ports Network Appliance ■ Intel® Atom™ E3845, up to 1.91 GHz/ Celeron® J1900 up to 2.42 GHz ■ 204-pin Dual-channel DDR3/L 1333 MHz SODIMM x 2, up to 8 GB ■ Intel® I210AT, 10/100/1000Base-TX Ethernet x 4 ■ 2.5” HDD x 1 (Optional), CompactFlash™ Socket x 1 ■ RJ-45 Console x 1, USB 2.0 x 2 ■ 100W ATX PSU LED USB 2.0 x 2 Software Programmable Button Power Switch AC Inlet RJ-45 Console x 1 LAN x 6 LCM Panel Platform Form Factor 1U Rackmount Network Platform Processor Intel® Atom™ E3845, up to 1.91 GHz/ Celeron® J1900 up to 2.42 GHz Chipset Integrated System Memory DDR3(L) 1333 SODIMM, up to 8GB, 204 Pin DIMM x 2 Network Ethernet Intel® i210AT, Gigabit Ethernet x 4 + NIM Bypass 2 NIM Slot — Display Graphic Controller Intel Integrated Connector VGA cable (Optional) Storage HDDs 2.5” SATA HDD x 1 (Optional) CF/CFast/mSATA CF socket x 1 Expansion/Internal Interface PCIe slot — Mini-card slot 1 IPMI — Keyboard and Mouse Pin-header Universal Serial Bus USB 2.0 x1 Box Header (2.0mm) (optional) Miscellaneous RTC Internal RTC Watchdog Timer 1~255 steps by software programmable Software Button GPIO Programmable push button x 1 TPM — GPIO — FAN 2 MTBF (Hours) 110,000 Color Black Environmental Parameters and Dimension Power Requirement 100W ATX PSU Operation Temp. 32°F ~ 104°F (0°C ~ 40°C) Storage Temp. -4°F ~ 140°F (-20°C ~ 60°C) Operating Humidity 10 ~ 80% Storage Humidity 10 ~ 80% @ 40°C, non-condensing Vibration 0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D) 1.5 Grms/ 5 ~ 500Hz/ no operation Shock 10G peak acceleration (11 m sec. duration), operation 20G peak acceleration (11 m sec. duration), non-operation Chassis Dimension (W x D x H) 16.93” x 11.02” x 1.73” (430mm x 280mm x 44mm) I/O Interfaces Front Panel - Power LED x 1 - Status LED x 1 - HDD Active LED x 1 - LAN ports Link/Active LED x 4 - Bypass LED (Default 2 LEDs) - USB 2.0 Ports x 2 - RJ-45 Console x 1 - Parallel LCM display and 4 keypad x 1 - Software Programmable Switch x 1 Rear Panel - AC Power Input x 1 - Power Switch x 1 - VGA port (Optional)