14 Network Appliances Note: All specifications are subject to change without notice. www.aaeon.com Features Specifications FWS-7350 Front View Rear View 1U Rackmount 4 LAN Ports Network Appliance with Intel® Atom™ Processor SoC ■ 1U Rackmount 4 LAN Ports Network Appliance ■ Onboard Intel® C2758/C2558 4-Core/ 8-Core 2.4 GHz Processor SoC ■ 240-Pin Dual-Channel ECC or non-ECC DDR3(L) 1600 MHz DIMM x 4, Up to 64 GB ■ Gigabit Ethernet x 4 ■ Optional Up to 2 Pairs LAN Bypass Function ■ 3.5” SATA HDD x 1 or 2.5” SATA HDD x 2 and CompactFlash™ Socket x 1 ■ RJ-45 Console x 1, USB 2.0 x 2 ■ NIM Slot x 1 ■ Optional PCI-E [x4] x 1 ■ ATX PSU 100W ■ Mini-PCIe Slot x 1 RJ-45 Console x 1 LED Indicators SW Programmable Button PCI-E [x4] Expansion Slot x 1 (Optional) System Fan x 1 (Smart Fan Supported) Power Switch 100W ATX Power LCM with Keypad USB 2.0 x 2 GbE LAN Port x 4 NIM Slot x 1 (Optional) Platform Form Factor 1U Rackmount Network Platform Processor Onboard Intel® C2758/C2558 4-Core/ 8-Core 2.4 GHz Processor SoC Chipset Integrated System Memory DDR3L 1600 UDIMM/ECC, up to 64GB, 240-pin DIMM x 4 Network Ethernet Marvell 88E1543 phy Gigabit Ethernet x 4 + NIM Bypass 2 ~ 4 (Depends on NIM) NIM Slot 1 Display Graphic Controller Mini-card VGA (Optional) Connector VGA cable (Optional) Storage HDDs Internal 3.5” SATA HDD x 1 or 2.5” SATA HDD x 2 (Optional) CF/CFast/mSATA CF socket x 1 Expansion/Internal Interface PCIe slot PCIe [x4] signal use [x8] slot Mini-card slot — IPMI — Keyboard and Mouse Pin-header Universal Serial Bus USB 2.0 x 1 Box Header (2.0mm) (optional) Miscellaneous RTC Internal RTC Watchdog Timer 1~255 steps by software programmable Software Button GPIO Programmable push button x 1 TPM — GPIO — FAN 1 MTBF (Hours) 109,000 Color Black Environmental Parameters and Dimension Power Requirement 100W ATX PSU Operation Temp. 32°F ~ 104°F (0°C ~ 40°C) Storage Temp. -4°F ~ 140°F (-20°C ~ 60°C) Operating Humidity 10 ~ 80% Storage Humidity 10 ~ 80% @ 40°C, non-condensing Vibration 0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D) 1.5 Grms/ 5 ~ 500Hz/ no operation Shock 10G peak acceleration (11 m sec. duration), operation 20G peak acceleration (11 m sec. duration), non-operation Chassis Dimension (W x D x H) 16.93” x 12.01” x1.73” (430mm x 305mm x 44mm) I/O Interfaces Front Panel - Power LED x 1 - Status LED x 1 - HDD Active LED x 1 - LAN ports Link/Active LED x 4 - Bypass LED (Default 2 LEDs) - USB 2.0 Ports x 2 - RJ-45 Console x 1 - Parallel LCM display and 4 keypad x 1 - Software Programmable Switch x 1 Rear Panel - AC Power Input x 1 - Power Switch x 1 - VGA port (Optional) - Rear Expansion Slot x 2 (Optional PCIe [x4] signal use x8 slot)