Copyright Lenovo 2017. All rights reserved. Components Specification Chipset Intel C612 Platform Controller Hub (PCH) System mgmt Intel Active Management Technology 9 Processor Up to two 145W Intel Xeon E5-2600 v4 family processors. Each processor supports up to 22 cores up to 2.2GHz, 16 cores up to 2.6GHz, 14 cores up to 2.6GHz, 12 cores up to 2.2GHz, 10 cores up to 2.4GHz, 8 cores up to 3.2GHz, 6 cores up to 3.4GHz, 4 cores up to 3.5GHz. Or up to two Intel Xeon E5-2620 v3 or E5-2609 v3 processors (not available in EMEA) Coprocessor None Memory DIMM slots 12 DIMM sockets (6 DIMMs per processor), 8-channel capable (4-channel per processor). RDIMM, ECC, DDR4-2400 Memory capacity 384GB, 2nd CPU is needed Graphics, GPU computing Three PCIe 3.0 x16 slots, two via CPU1, one via CPU2. Up to three graphics and GPU computing adapters, 2nd CPU is needed PSU Maximum quantity of PCIe x16 adapters per system (by power) 650W 1x150W+2x75W with onboard SATA controller and up to two 120W CPU each 850W 1x300W+2x75W (up to two 120W CPU each), or 2x150W+1x75W Supporting Graphics and GPU computing Adapter Cores Memory Power Connector*** SLI NVS 310 48 1GB 19.5W 2xDP NVS 315 48 1GB 19.5W 2xDVI-I SL/2xDP NVS 510 192 2GB 35W 4xmini DP NVS 810 1024 4GB 68W 8xmini DP Quadro K420 192 2GB 41W DVI-I DL+DP Quadro K620 384 2GB 45W DVI-I DL+DP Quadro K1200 512 4GB 45W 4xmini DP Quadro K2200 640 4GB 68W DVI-I DL+2xDP Quadro K4200 1344 4GB 108W DVI-I DL+2xDP Quadro K5200 2304 8GB 150W DVI-I DL+DVI-D DL+2xDP SLI Quadro M2000 768 4GB 75W 4xDP Quadro M4000 1664 8GB 120W 4xDP Quadro M5000 2048 8GB 150W DVI-I DL+4xDP SLI Quadro M6000 3072 24GB 250W DVI-I DL+4xDP SLI Quadro P400 256 2GB 30W 3xminiDP Quadro P600 384 2GB 40W 4xminiDP Quadro P1000 640 4GB 47W 4xminiDP Quadro P2000 1024 5GB 75W 4xDP Quadro P4000 1792 8GB 105W 4xDP SLI Quadro P5000 2560 16GB 180W DVI-D DL+4xDP SLI Quadro P6000 3840 24GB 250W DVI-D DL+4xDP Tesla K40 2880 12GB 235W Disk drive controller RAID 0, 1, 5, 10 with onboard SATA controller in chipset, SATA 6Gb/s. RAID 0, 1, 5, 10 with optional LSI RAID flex adapter, 12Gb/s SAS and SATA. RAID 0, 1, 5, 6, 10 with optional LSI 9364-8i PCIe adapter, 1GB memory, 12Gb/s SAS and SATA Drive Bays Two external 5.25" flex bays, four 3.5" internal bays. Each 3.5" bay can support dual drives on selected models (see right) Flex bay Two 5.25" flex bays for optical drives, Front Access Storage Enclosure drives, Flex Bay Storage Enclosure drives, or flex module. • Up to two half-height optical drives or up to one 9.5mm optical drive, DVD-ROM, DVD±RW, or Blu-Ray burner • Up to one Front Access Storage Enclosure for one 3.5" or 2.5" SATA drive. • Up to two Flex Bay Storage Enclosure for two 3.5" or 2.5" SATA drives. Supporting storage 3.5" SATA HDD, 7.2K 6Gbs 500GB/1TB/2TB/3TB/4TB/6TB/1TB hybrid/2TB hybrid 2.5" SAS HDD, 15K 12Gbs 300GB/600GB 2.5" SAS SSD, 12Gbs 200GB/400GB/800GB 2.5" SAS HDD, 10K 12Gbs 300GB 2.5" SSD, SATA6Gbs 180GB/240GB/256GB/480GB/512GB with OPAL, 256GB/512GB/1TB without OPAL PCIe SSD, 2.5" 400GB PCIe SSD, M.2 256 GB/512GB/1TB PCIe SSD adapter 400GB (up to 4 per system, 2nd CPU is needed) Expansion slots Slot 1: PCIe 3.0 x16, half length, full height, CPU2 needed (full length, full height if no flex adapter) Slot 2: PCIe 3.0 x16, full length, full height Slot 3: PCIe 3.0 x8, full length, full height, CPU2 needed Slot 4: PCIe 3.0 x16, full length, full height Slot 5: PCI, full length, full height Slot 6: PCIe 2.0 x4, half length, full height Also supports one flex connector HDD 1 HDD 3 HDD 2 HDD 4 Expansion slots 1-6 (top-down) Flex connector ThinkStation P710 Platform Specifications Product Specifications Reference (PSREF) Components Specification Flex connector One flex connectors (see right), supports one of the following: • Up to one LSI RAID flex adapter for SATA/SAS RAID • Up to one Multi-I/O flex adapters for two PCIe SSD • Up to one M.2 flex adapters for two M.2 PCIe SSD Network interfaces Integrated two-port gigabit ethernet (Intel i218LM and i210AT), supports Wake- on-LAN. Optional discrete ethernet adapters are available HD Audio Realtek ALC662 codec TPM TCG 1.2-compliant Power supply One fixed 650 watts or 850 watts, autosensing, 92%, 80 PLUS Platinum qualified Front ports Four USB 3.0 (one Diagnostic, one Always On), one combo audio/microphone jack (3.5mm) Rear ports Four USB 2.0, four USB 3.0 (blue), one serial (9-pin), two ethernet (RJ-45), three analog audio ports (line-in, line-out, mic-in), two PS/2 Add-on ports Supports the following optional ports: Two IEEE 1394 (one on rear and one on front flex module) via PCIe adpater, up to one adapter per system. Two rear USB 3.0 per PCIe adapter, up to three adapters per system. One rear Thunderbolt via PCIe adapter. One front eSATA (on flex module), or one rear eSATA via cable (also needs one PCIe slot), up to one eSATA port per system. One internal USB 3.0 port via cable, cannot be intermixed with 29-in-1 reader Media reader 9-in-1 USB 2.0 card reader. Optional 29-in-1 USB 3.0 card reader on flex module Mechanical • 36-liter: 175mm/6.89" W x 485mm/19.1" D x 446mm/17.6" H (with feet) • Tool-less parts: all except CPU fansink • 52.25 lb (23.7kg) max configuration Environmental specification Temperature - operating 50 o F to 95 o F (10 o C to 35 o C) Temperature - non operating (no package) 14 o F to 140 o F (-10 o C to 60 o C) Temperature - non operating (with package) -40 o F to 140 o F (-40 o C to 60 o C) Altitude - operating (Unpressurized): 0-10000ft (0-3048m) Humidity - operating 10%~80%, non-condensing Humidity - storage (with package) 10%~90%, non-condensing RoHS-compliant, GREENGUARD on all models. EPEAT Gold rating, ENERGY STAR 6.1 qualified on selected models. Base warranty 3-year limited onsite service with 9x5/NBD ISV certifications Please visit www.thinkworkstations.com/isv-certifications/ Drive Bays HDD 1-4: Standard 3.5" HDD bay, up to four 3.5" or 2.5" disk drives. On selected models, each 3.5" bay can supports 2.5" (9mm or less) drive plus 3.5"drive, or two 2.5" (15mm or less) drives. Flex bay: Two 5.25" flex bays, for HH optical drives. Or up to one optional flex module (Flex module supports one or more of the following options: 9.5mm optical/29-in-1 USB 3.0 reader/front IEEE 1394/front eSATA). Or up to two HDD bays for two drives, 3.5" or 2.5" each, SATA only. Two 5.25" flex bays