Ethernet I/O Modules: ADAM-6000 ADAM-6117 ADAM-6160 Specifications Analog Input ƒ ƒ Channels 8 (differential) ƒ ƒ Input Impedance > 10 MΩ (voltage) 120 Ω (current) ƒ ƒ lnput Type mV, V, mA ƒ ƒ lnput Range ±150 mV, ±500 mV, ±1 V ±5 V, ±10 V, 0 ~ 20 mA, 4 ~ 20 mA, ±20 mA ƒ ƒ Span Drift ± 30 ppm/°C ƒ ƒ Zero Drift ± 6 μV/°C ƒ ƒ Resolution 16-bit ƒ ƒ Accuracy ± 0.1% of FSR (Current) at 25°C ± 0.2% of FSR (Current) at 25°C ƒ ƒ Sampling Rate 10 sample/second (total) ƒ ƒ CMR @ 50/60 Hz 92 dB ƒ ƒ NMR @ 50/60 Hz 67 dB ƒ ƒ High Common Mode 200 VDC Ordering Information ƒ ƒ ADAM-6117EI 8-ch Isolated AI EtherNet/IP Module 8-ch Isolated Analog Input Real-time Ethernet Module 6-ch Relay Real-time Ethernet Module Common Specifications General ƒ ƒ LAN 10/100Base-T(X) ƒ ƒ Power Consumption ADAM-6117: 3.5 W @ 24 VDC ADAM-6160: 4.5 W @ 24 VDC ƒ ƒ Connectors 2 x RJ-45 LAN (Daisy Chain) Plug-in screw terminal block (I/O and power) ƒ ƒ Watchdog System (1.6 second) ƒ ƒ Power Input 10 ~ 30 VDC Protection ƒ ƒ Isolation Protection 2,500 VDC ƒ ƒ Built in TVS/ESD Protection ƒ ƒ Power Reversal Protection Environment ƒ ƒ Operating Temperature -10 ~ 70°C (14 ~ 158°F) ƒ ƒ Storage Temperature -20 ~ 80°C (-4 ~ 176°F) ƒ ƒ Operating Humidity 20 ~ 95% RH (non-condensing) ƒ ƒ Storage Humidity 0 ~ 95% RH (non-condensing) ADAM-6117 RoHS COMPLIANT 2002/95/EC Specifications Relay Output ƒ ƒ Channels 5 Form C and 1 Form A ƒ ƒ Contact Rating (Resistive) 250 VAC @ 5A 30 VDC @ 5A ƒ ƒ Max. Switching Voltage 400 VAC 300 VDC ƒ ƒ Breakdown Voltage 500 VAC (50/60Hz) ƒ ƒ Max. Breakdown 1250 VA Capacity ƒ ƒ Frequency of Operation 360 operations/hour with load 72,000 operations/hour without load ƒ ƒ Set/Reset Time 8 ms/8 ms ƒ ƒ Mechanical Endurance > 15 x 106 operations ƒ ƒ Isolation between 1000 Vrms Contact ƒ ƒ Insulation Resistance > 10 GΩ @ 500 VDC Ordering Information ƒ ƒ ADAM-6160EI 6-ch Relay EtherNet/IP Module ADAM-6160 RoHS COMPLIANT 2002/95/EC Chapter 15 Table of Contents Table of Contents