www.advantech.com/products Online Download Features ADAM-5000/485 ADAM-5000E Introduction The ADAM-5000/485 and ADAM-5000E systems conform to the EIA RS-485 communication standard. This is the industry's most widely used, balanced, bidirectional transmission line standard. RS-485 was specifically developed for industrial applications to transmit and receive data at high rates over long distances. Specifications Control System CPU 16-bit 80188 microprocessor I/O Slots ADAM-5000/485: 4 ADAM-5000E: 8 LED Indicators Power, CPU, communications Watchdog Timer 1.6 sec. (System) Communications Command Format ASCII command/response protocol, Modbus/RTU Communication RS-485: 1.2 km (4000 feet) Distance Data Format Asynchronous. 1 start bit, 8 data bits, 1 stop bit, no parity Network Protocols Programming link: RS-232 (3-wire: TX, RX, GND) Communication: RS-485 (2-wire) Reliability Check Communication error checking with checksum Max. Nodes 128 (in RS-485 daisy-chain network) Speeds (kbps) 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, and 115.2 Power Power Consumption 3 W @ 24 VDC (ADAM-5000/485) (not including I/O modules) 4.0 W @ 24 VDC (ADAM-5000E) (not including I/O modules) Power Input Unregulated 10 ~ 30 VDC Software Driver Support Windows DLL, OPC Server, Wonderware InTouch, Intellution, iFIX, Citect, Advantech Studio, ADAMView C and .NET Class Library Protection Communication Line 2,500 VDC (ADAM-5000/485) Isolation 3,000 VDC (ADAM-5000E) I/O Module Isolation 3,000 VDC Transient Protection RS-485 communication lines, power input Power Reversal Yes Protection General Certification CE, FM Connectors 1 x DB9-M/DB9-F/screw terminal for RS-485 (communication) 1 x DB9-F for RS-232 (configuration) 1 x Screw-terminal for power input Dimensions (WxHxD) 4-slot: 231 x 110 x 75 mm 8-slot: 355 x 110 x 75 mm Enclosure ABS+PC Mounting DIN-rail, wall, rack (with mounting kit) Environment Humidity 5 ~ 95%, non-condensing Operating Temperature -10 ~ 70°C (14 ~ 158°F) Storing Temperature -25 ~ 85°C (-13 ~ 185°F) Ordering Information ADAM-5000/485 4-slot Distributed DA & C System for RS-485 ADAM-5000E 8-slot Distributed DA & C System for RS-485 RS-485 communication for easy installation and networking 4 or 8 slots for up to 128 points data monitoring card control in one module Extensive software support, includes windows DLL drivers, OCX drivers, OPC server and popular HMI/SCADA software drivers Seamlessly integrated with easy-to-use ADAMView data acquisition software Supports ADAM ASCII protocol or Modbus® /RTU protocol Supports Modbus/RTU protocol with user-defined Modbus address 4-slot Distributed DA&C System for RS-485 8-slot Distributed DA&C System for RS-485 RoHS COMPLIANT 2002/95/EC Power & Energy Automation 8 5 4 4 10 Panel PCs 9 iDoor Technology Modules 8 Industrial monitors 7 Industrial IoT Gateways 6 Control Cabinet PCs High-Performance Control Panels Industrial Operator Panels 3 2 IntelligentMotionControl andMachineVision 1 11 Control IPCs 12 Remote DA&C Systems 13 Wireless IoT Sensing Devices 14 Ethernet I/O Modules 15 RS-485 I/O Modules 16 Thin-Client Terminals Industrial Ethernet Solutions 17 IP Gateway and Serial Device Servers iNetworking 18 19 WebAccess+ Solution Chapter 13 Table of Contents Table of Contents